Dynamic stress of a circular cavity buried in a semi-infinite functionally graded piezoelectric material subjected to shear waves

The paper presents a theoretical method to investigate the multiple scattering of shear waves and dynamic stress around a circular cavity in a semi-infinite functionally graded piezoelectric material. The analytical solutions of wave fields are expressed by employing wave function expansion method and the expanded mode coefficients are determined by satisfying the boundary conditions of the cavity. Image method is used to satisfy the free boundary condition of the semi-infinite structure. According to the analytical expression of this problem, the numerical solutions of the dynamic stress concentration factor around the cavity are presented. The effects of the piezoelectric property, the buried depth of the cavity, the incident wave number and the nonhomogeneous parameter of materials on the dynamic stress around the cavity are analyzed. Analyses show that the piezoelectric property has great effect on the dynamic stress in the region of intermediate frequency and the effect increases with increasing wave number. When the nonhomogeneous parameter of materials is less than zero, it has less influence on the maximum dynamic stress around the cavity; however, it has greater influence on the distribution of the dynamic stress around the cavity. When the nonhomogeneous parameter of materials is greater than zero, it has greater influence on both the maximum dynamic stress and the distribution of dynamic stress around the cavity, especially in the case that the buried depth is comparatively small.     

Freezing-off in disc cavities

A semi-quantitative analysis is presented of freezing-off in a disc cavity during the injection moulding of thermoplastics. A criterion is obtained which enables the occurrence of freezing-off to be predicted, at least crudely. The form of the criterion is found to depend on the direction of flow (radially outward or inward) in the disc.     

大长细比弹体斜侵彻混凝土靶的动力学响应

基于刚塑性自由梁在横向冲击载荷下的动力学响应研究方法,结合空腔膨胀理论给出的弹体载荷分析,给出了弹体作为自由梁在塑性铰出现之前的响应行为,得到了梁内任一截面在横向载荷下剪力和弯矩分布规律以及轴向载荷下的轴力分布规律。计算结果表明,大长细比结构弹体的危险截面在承受较大轴向惯性压力载荷后,对由非正侵彻导致的横向载荷极为敏感。最后基于压弯联合作用载荷分析,给出了动能弹设计的抗弯极限壁厚要求。     

Three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD

Based on the successive iteration in the Taylor series expansion method,a three-point explicit compact difference scheme with arbitrary order of accuracy is derived in this paper.Numerical characteristics of the scheme are studied by the Fourier analysis. Unlike the conventional compact difference schemes which need to solve the equation to obtain the unknown derivatives in each node,the proposed scheme is explicit and can achieve arbitrary order of accuracy in space.Application examples for the convection- diffusion problem with a sharp front gradient and the typical lid-driven cavity flow are given.It is found that the proposed compact scheme is not only simple to implement and economical to use,but also is effective to simulate the convection-dominated problem and obtain high-order accurate solution in coarse grid systems.     

Fhree-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD

Based on the successive iteration in the Taylor series expansion method, a three-point explicit compact difference scheme with arbitrary order of accuracy is derived in this paper. Numerical characteristics of the scheme are studied by the Fourier analysisl Unlike the conventional compact difference schemes which need to solve the equation to obtain the unknown derivatives in each node, the proposed scheme is explicit and can achieve arbitrary order of accuracy in space. Application examples for the convectiondiffusion problem with a sharp front gradient and the typical lid-driven cavity flow are given. It is found that the proposed compact scheme is not only simple to implement and economical to use, but also is effective to simulate the convection-dominated problem and obtain high-order accurate solution in coarse grid systems.     

彬县水帘洞煤矿工业场地西侧黄土高边坡特征及成因分析

水帘洞煤矿工业场地西侧黄土高边坡为老滑坡的后壁,在边坡的脚下有老滑坡体残留物。地表水沿黄土垂直节理、裂隙下渗,逐渐在边坡的顶部形成落水洞;边坡还受黄土层理、倾角（5°～10°）和古土壤层位置的控制,地表水下渗至古土壤层,古土壤层是良好的隔水层,加上黄土层理倾向沟谷,在古土壤层面位置（半山腰）易形成与边坡顶部落水洞贯通的落水洞出口。受长期降水或短期强降水的影响,导致边坡失稳。     

SCATTERING OF CIRCULAR CAVITY IN RIGHT-ANGLE PLANAR SPACE TO STEADY SH-WAVE

Complex function method and multi-polar coordinate transformation technology are used here to study scattering of circular cavity in right-angle planar space to SH-wave with out-of-plane loading on the horizontal straight boundary. At first, Green function of right-angle planar space which has no circular cavity is constructed; then the scattering solution which satisfies the free stress conditions of the two right-angle boundaries with the circular cavity existing in the space is formulated. Therefore, the total displacement field can be constructed using overlapping principle. An infinite algebraic equations of unknown coefficients existing in the scattering solution field can be gained using multi-polar coordinate and the free stress condition at the boundary of the circular cavity. It can be solved by using limit items in the infinite series which can give a high computation precision. An example is given to illustrate the variations of the tangential stress at the boundary of the circular cavity due to different dimensionless wave numbers, the location of the circular cavity, the loading center and the distributing range of the out-of-plane loading. The results show the efficiency and effectiveness of the method introduced here.     

Lifting of Disperse Particles from a Cavity Behind the Front of an Unsteady Shock Wave with a Triangular Velocity Profile

The gas flow in plane shock waves slipping along an impermeable surface with a rectangular cavity where solid disperse particles are suspended is considered numerically. The motion of the gas and particles (gas suspension) is modeled by equations of mechanics of multiphase media. Some laws of the behavior of the dusty cloud in the cavity are established for the case of wave interaction with the cavity.     

岩石爆破的粉碎区及其空腔膨胀

本文根据爆炸冲击波的理论分析,讨论了柱形装药和球形装药的粉碎区半径、炮孔近区的压缩比、爆破空腔及其空腔的发展时间。通过分析,给出柱形装药的爆炸近区参数。计算结果表明:2号铵梯岩石炸药柱形装药在岩石介质中产生的粉碎区半径一般是炮孔半径的1.65～3.05倍,球装药在岩石介质中产生的粉碎区半径是球形装药半径的1.28～1.75倍;柱形装药在孔壁处的冲击波波长与炮孔半径属于同一量级;粉碎区内的平均压缩比为1.05～1.10。     

Shear-opposed mixed-convection flow and heat transfer in a narrow, vertical cavity

A combined experimental and theoretical study has been carried out to investigate mixed-convection heat transfer in a narrow, vertical cavity. The shear force is produced at the left side of a cavity by a belt moving upward that constitutes the sixth wall of the cavity. The left wall of the cavity was cooled and the opposite (right wall) was heated. Hence, the buoyancy force tries to bring the fluid down, and the shear force tends to induce upward fluid flow. The test cell was equipped with two heat exchangers and three thermocouple racks for measuring the temperature distributions at 12 different positions. The temperature field was scanned in the cavity for various flow and temperature boundary conditions. Three-and-two-dimensional laminar models were used to analyze the problem theoretically. The experimental measurements were found to be in good agreement with the numerical predictions.